JJ干瞪眼

Jiangsu Runli Boiler Co., Ltd.

Jiangsu Runli Boiler Co., Ltd.

13771452500 Customer_Hot_Line 13771452500

> >
YLW coal-fired organic heat carrier furnace

contact us

Contact us

张先生 linkman: Mr. Zhang

13771452500 linkphone: 13771452500

331077159 QQ: 331077159

中国江苏省常州市雪堰工业区雪东路2号 address: No. 2 Xuedong Road, Xueyan Industrial Zone, Changzhou City, Jiangsu Province, China

YLW coal-fired organic heat carrier furnace

YLW coal-fired organic heat carrier furnace

160~17500KW Rated thermal power: 160 ~ 17500KW

0.8MPa Working pressure: 0.8MPa

320℃ Maximum working temperature: 320 ℃

烟煤 Applicable fuel: bituminous coal

YLW燃煤有机热载体炉

Product Range

Rated thermal power: 160 ~ 5900KW Working pressure: 0.8MPa

Boiler model YLW- YLW- YLW- YLW- YLW- YLW-
1900MA 2300MA 2900MA 3500MA 4100MA 4700MA
Rated power Kw 1900 2300 2900 3500 4100 4700
Heat supply × 104kcal / h 160 200 250 300 350 400
Thermal efficiency % 76 76 76 76 76 76
Design pressure Mpa 1.1 1.1 1.1 1.1 1.1 1.1
Working temperature ℃ 320 320 320 320 320 320
3 /h Medium circulation m 3 / h 160 160 200 200 260 260
3 Furnace medium capacity m 3 2.8 3 4 4.5 5.1 5.5
Supervisor caliber DN 150 150 200 200 200 200
Installed capacity kw 75 90 100 100 120 140
Applicable coal Class Ⅱ bituminous coal

product manual

YLW series organic heat carrier furnace is an assembled forced circulation chain grate boiler. The front part of the boiler body is the radiant heating surface of the furnace, which is composed of close-packed double-coiled coils; the rear part is convection; The boiler consists of an upper body and a lower chain grate, which are assembled on site. The air preheater is arranged behind the boiler. The high-temperature flue gas generated by the combustion absorbs part of the heat in the furnace chamber, enters the convection heating surface through the diverting smoke chamber, and heats it out of the boiler in an air preheater, and then the flue gas is sent by a draft fan through a dust collector. Until the chimney is discharged into the atmosphere.

Easy installation, as long as the upper body and the lower grate are closed, the installation cycle is short.

The furnace uses double-dense coiled coils, and the heating surface is adequately arranged to reduce the heat load on the surface of the tube, making the use of heat transfer oil safer.

The medium flow is reasonable, and the heat transfer oil is from low (inlet) to high (outlet). The gas generated during operation is difficult to stay in the furnace and can be easily discharged from the system.

The design of the furnace arch is reasonable, the flue gas stays in the furnace for a long time, and the combustion is more sufficient.

The turning smoke chamber is arranged with a heating surface, so that the partition wall avoids direct flushing of high-temperature smoke, which effectively prevents the short-circuit phenomenon of smoke caused by the falling of the smoke wall.


Product Range

Rated thermal power: 5900 ~ 14000KW Working pressure: 0.8MPa

Boiler model YLW- YLW- YLW- YLW- YLW- YLW-
5900MA 7000MA 8200MA 9400MA 12000MA 14000MA
Rated power Kw 5900 7000 8200 9400 12000 14000
Heat supply × 104kcal / h 500 600 700 800 1000 1200
Thermal efficiency % 76 76 76 76 76 76
Design pressure Mpa 1.1 1.1 1.1 1.1 1.1 1.1
Working temperature ℃ 320 320 320 320 320 320
3 /h Medium circulation m 3 / h 300 340 400 520 600 680
3 Furnace medium capacity m 3 7.2 8.3 8.9 9.9 12.3 16
Supervisor caliber DN 250 250 250 300 300 350
Installed capacity kw 175 215 215 270 315 380
Applicable coal Class Ⅱ bituminous coal